New orders are paused until mid January while our cutting queue catches up. You can still upload files, view instant prices, and save quotes.

Custom cut parts, made simple

Water jet and fibre laser cutting, priced the moment you upload

Upload your design, pick a material and thickness, and we'll handle the rest: pricing, precision cutting in aluminium, stainless steel or mild steel, and delivery to your door anywhere in Australia.

  • Quotes with no back-and-forth
  • Every file checked before cutting
  • Parts saved for easy reorder

Get an instant price

Drop your design files. We measure the cut length, count the holes and calculate the metal each part needs. Priced in seconds, ready to order online.

Browse files or drag and drop, several at once is fine
DXF · DWG · SVG · AI · PDF · STEP · IGES · EPS up to 25MB
or

No account needed to price or order. Your files are safe, secure, and stay your intellectual property.

Opening your instant quote

Checking your file and pricing it now…

Made in Melbourne, ships Australia-wide
No minimum order
8 file formats accepted
Secure online checkout

How it works

Three steps from file to ordered parts, in about a minute. No phone calls, no waiting on a reply.

kerf.au/quote
  1. 1

    Upload your files

    Drop in your DXF, DWG, SVG, AI, PDF, STEP, IGES or EPS files, one part or a whole batch, then pick the material, thickness and quantity for each. No drawing? Describe the part in words and we'll draw it for you to check.

  2. 2

    Get your quote

    Your file is checked and priced on the spot. Change material, thickness or quantity and watch the price update live.

  3. 3

    Receive your parts

    Order online and we cut, pack and post your parts anywhere in Australia. Precision cut, ready to use.

Open the quote workspace
“I ordered a couple of water-jet cut parts from Kerf for use in my guitar business Solace Instruments. The online interface made it really easy to upload files and pay, the communication excellent and parts perfect. I’ll definitely be back.”
Dave, Solace Instruments, SydneyCut in mild steel (Gr 250), 5 mm

See it cut

Our water jet at work, slowed down. A jet of water and abrasive cuts the metal cold, so the edges stay clean and flat.

Materials we cut

Sheet and plate are cut on a fibre laser. Thick plate, brass and copper are cut on a water jet. Each card lists the thicknesses we stock and marks the ones that are currently unavailable.

Aluminium

Light and corrosion resistant. 5005 for panels and signs, 5083 marine grade, 6061-T6 structural (imperial plate)
50051.63456 mm
50833456 mm
Currently unavailable: 8, 10, 12, 16, 20, 25 mm
6061-T6 Currently unavailable: 4.76, 6.35, 7.94, 9.53, 12.7, 15.88, 19.05, 25.4 mm
thicker on request

Stainless Steel

Durable, food-safe, weather-proof. 304 everyday, 316 marine
3043456810 mm
Currently unavailable: 12, 16, 20, 25 mm
3166810 mm
Currently unavailable: 12, 16 mm
thicker on request

Mild Steel

Cost-effective, strong and weldable
Gr 250568101216 mm
Currently unavailable: 20, 25 mm
thicker on request

Brass

Warm finish for signage, hardware and detail work. C260
Currently unavailable: 0.8, 1, 1.2, 1.6, 2, 2.5, 3, 4, 5, 6 mm
thicker on request

Copper

Distinctive and conductive, with a patina that deepens over time. C122
Currently unavailable: 0.7, 0.9, 1.2, 1.6, 2, 3, 4 mm
thicker on request

Why Kerf

The easiest way to get custom parts cut in Australia.

Reliable turnaround

Quotes in seconds. Parts cut within 15 business days, then shipped.

Water jet and fibre laser

Fibre laser for sheet and plate. Water jet for thick plate, brass and copper, cut with water, not heat. Clean lines straight off the machine.

No minimums

One-off part or a full production run: every job gets the same care.

Checked before cutting

We review your geometry before it's cut and flag anything that won't work.

Your designs stay yours

Files are stored securely and never shared. You keep all intellectual property.

Made in Melbourne

Water jet and fibre laser cutting done in Melbourne’s south east, shipped Australia-wide. Support Australian manufacturing.

Frequently asked questions

What's a kerf?

The kerf is the slot the blade leaves behind: the material the cut removes. It's the first thing any fabricator accounts for, so we named the company after it. The longer story is on the blog.

Water jet or fibre laser: how is my part cut?

We cut on a fibre laser and a water jet. The fibre laser cuts sheet and plate quickly and accurately. Water jet cutting uses ultra-high-pressure water and abrasive, not heat, so it suits thick plate, brass and copper. The material and thickness you choose decide which one cuts your part.

How thick can you cut?

Every thickness we stock is listed under each metal in Materials we cut. Thicker plate is water jet work. Ask us and we'll confirm.

How much does water jet or laser cutting cost?

Four things set the price: the material, its thickness, the total cut length (every hole included) and the quantity. Thicker material cuts slower, so it costs more per part; more parts share the setup, so each one costs less. Upload your file and the exact price for your part appears in seconds, with no obligation to order.

Is waterjet cheaper than laser cutting?

For thin sheet metal, laser cutting is usually cheaper because it cuts faster. Water jet cutting wins on thick plate and where heat would do damage, such as hardened or heat-treated parts. We cut on both. See the full waterjet vs laser comparison.

What can't a waterjet cut?

Very little that is flat. Tempered glass shatters and a few laminates delaminate. On kerf.au we only cut from our own stock. The metals and thicknesses are listed under Materials we cut.

What files can I upload?

DXF, DWG, SVG, AI, PDF, STEP, IGES and EPS files up to 25MB. STEP and IGES parts need to be flat (no bends) for an instant price. If your file is in another format, send it through and we'll sort it out with you.

I don't have a drawing. Can you still cut my part?

Yes. Describe it in words and we'll draw it, with every size shown so you can check and change it. You can also start from a template: a plate, disc, gasket or bracket, sized to your numbers. Every part is checked before cutting.

How fast will I get my quote?

Instantly. Upload your file and your price appears in seconds, ready to order online. Every file is still reviewed before it's cut, so what arrives is what you designed.

How long does production take?

Parts are cut within 15 business days of payment. Delivery time is on top of that: Parcel Post or Express Post, your choice at checkout. We email you the moment your parts ship.

Is there a minimum order?

No. We're happy to cut one small bracket or five hundred panels.

Where do you ship?

Australia-wide, from our Melbourne workshop. Delivery cost is calculated at checkout.

Can I reorder a part?

Yes. Every part you order is saved to your parts library. Sign in with your email and reorder in a couple of clicks, priced at current rates.

Can I get a tax invoice?

Yes. Every paid order has a tax invoice as a PDF in your Order history on kerf.au: open Orders, find the order and click Tax invoice. It shows our ABN, the GST included and everything you paid, delivery included. You also receive an order confirmation by email as soon as payment goes through.

What happens to my design files?

They stay yours. We store them securely, use them only to cut your parts, and never share them with anyone.

Follow along on Instagram

What we cut, how it works and orders on their way.

Follow @kerf.au
A typed request for a 300 by 150 mm motor mounting plate with corner holes, a 52 mm centre hole and four 6 mm holes on a 70 mm circle, and the plate KERF drew from it. Headline: No drawing? Describe it. A chat. Someone asks their AI to price a 110 mm ring gasket in 3 mm marine aluminium, ten off. The AI replies with the KERF price, $8.84 each and $88.40 for ten including GST, and offers the pay link. Headline: Ask your AI to price your part. An open cardboard box holding a KERF packing slip and a Thanks for your order card, on a green cutting mat. Headline: Cut with water, not heat. Three ticks: nothing discolours, nothing warps, no hardened edges. Five metal swatches with thickness ranges: aluminium 1.6 to 25 mm, stainless steel 3 to 25 mm, mild steel 5 to 25 mm, brass 0.8 to 6 mm, copper 0.7 to 4 mm. Video: a ring gasket drawing is uploaded to the KERF quote page and priced, then the metal, thickness and quantity change and the total updates.

Ready to cut

Upload your file and see how simple custom cutting can be.

Get a quick quote